Round Seat CH1500
A traditional handy round seat
Round Seat CH1500
A round seat that is upholstered with the new stylish and extremely durable Future material (14 colors) or environmentally friendly Nature (5 colors). The chair features a gas spring assisted height adjustment with cover for the gas spring according to the base color.
Seat diameter is 37 cm. Safe Working Load (SWL) 150 kg.
Standard configuration:
- polished aluminum Ø 528 mm base
- height adjustment range Medium (50 – 70 cm)
- black 65 mm castors
- upholstery Future (14 colors) or Nature (5 colors)
Product featured with Future Sapphire, polished aluminum Ø 610 mm base and options: back support and brake-loaded 50 mm castors.
TECHNISCHE DATEN
| Seat diameter | 37 cm |
| Height adjustment | 50 - 70 cm |
| Castor | Ø 65 mm, black |
| Base | Polished aluminum Ø 528 mm |
| Upholstery | Future (14 colors) or Nature (5 colors) |
| Country of manufacture | Finland |
ZUBEHÖR
Factory-installed options:
- Height adjustment Low (42 - 55 cm)
- Height adjustment High (58 - 83 cm)
- Base polished aluminum Ø 610 mm
- Base white-coated Ø 528 or Ø 610 mm
- Back support with angle adjustment (requires base Ø 610 mm)
- Foot height adjustment (requires 65 mm castors; not compatible with height adjustment Low)
- Foot support ring (not compatible with foot height adjustment; not compatible with height adjustment Low)
- Castors:
- 65 mm, white
- 65 mm locking, black or white
- 50 mm brake-loaded, black (locks when seated)
- 50 mm ESD, black (electrically conductive). Upholstery only of black ESD artificial leather.
- 65 mm ESD, black (electrically conductive). Upholstery only of black ESD artificial leather.
MATERIALOPTINEN
Future
Featuring a slightly pearlescent finish, the stylish Future is an environmentally friendly and fire safety tested upholstery material in the Lojer upholstery range. Its antibacterial, antimicrobial and mold-proofing properties make Future an ideal material for demanding applications. The material features cutting-edge coating technology that remains on the surface and does not wear out even when cleaned. At the same time it prevents the growth of bacteria (which causes smells and stains), prolonging the service life of the upholstered parts.
This extremely durable material is 3 to 6 times more durable than traditional faux leather materials (Martindale over 300 000 cycles) and highly resistant to deterioration such as cracking, splitting, and loss of flexibility. It is also waterproof and fade-resistant.
The surface coating, durability and performance of Future upholstery material have been designed specifically for the healthcare industry, where bacteria, abrasions and stains are particularly challenging. The material is easy to clean and must be cleaned frequently. It fulfills REACH chemicals regulation requirements, which proves a high emphasis level of health and environment protection.
Material composition:
This extremely durable material is 3 to 6 times more durable than traditional faux leather materials (Martindale over 300 000 cycles) and highly resistant to deterioration such as cracking, splitting, and loss of flexibility. It is also waterproof and fade-resistant.
The surface coating, durability and performance of Future upholstery material have been designed specifically for the healthcare industry, where bacteria, abrasions and stains are particularly challenging. The material is easy to clean and must be cleaned frequently. It fulfills REACH chemicals regulation requirements, which proves a high emphasis level of health and environment protection.
Material composition:
- Topcoat 81% vinyl
- Backing 19% polyester
Colour options
Technical features
Resistant to oil and fat
Antibacterial
Resistant to disinfectants (according to a separate listing)
Waterproof
Resistant to secretions
Flame retardant:
Lightfast
Antimicrobial
Tear-resistant
Long-lasting
Easy to clean
Environmentally friendly
Fulfills REACH requirements
Fulfills toys norm DIN EN 71-3
Antibacterial
Resistant to disinfectants (according to a separate listing)
Waterproof
Resistant to secretions
Flame retardant:
- EN 1021-1+2
- UNE 23.727-90
- NF P 92-503
- DIN 4102 B2
- ÖNORM B 3825
- ÖNORM A 3800
- UNI 9175
- IMO FTP Part 8
- FMVSS 302
- FAR 25.853
- ECE R118.02
- EN 71-2 Part 2
Lightfast
Antimicrobial
Tear-resistant
Long-lasting
Easy to clean
Environmentally friendly
Fulfills REACH requirements
Fulfills toys norm DIN EN 71-3
Cleaning
New coating technology continues to provide its bacteria-fighting protection even after repetitive cleanings. Advanced vinyl protection results in a more hygienic environment because germ counts can be kept down. It offers unsurpassed antifungal protection by resisting gram positive and gram -negative bacteria, filamentous fungi and yeast.
Possible stains, leaks or dirt must be cleaned immediately using a mild detergent solution (1:1 neutral liquid detergent and water) or a cleaning agent suitable for vinyl surfaces, a microfibre cloth and/or a soft brush. The material is then rinsed with clean water and the surface is dried. Future upholstery material can be cleaned using disinfectants (according to a separate listing, e.g. Oxivir or Klorilli). Difficult stains – such as blood and urine – can be cleaned using an Isopropyl alcohol and water solution (1:10 ratio). After disinfection the surface must be cleaned with a clean, damp microfibre cloth.
Daily cleaning and maintenance
Make-up
Blood, urine, feces
Do not use!
Attention!
Certain clothing and accessory dyes (such as those used on denim jeans) may migrate to lighter colours. This phenomenon is increased by humidity and temperature and is irreversible.
Possible stains, leaks or dirt must be cleaned immediately using a mild detergent solution (1:1 neutral liquid detergent and water) or a cleaning agent suitable for vinyl surfaces, a microfibre cloth and/or a soft brush. The material is then rinsed with clean water and the surface is dried. Future upholstery material can be cleaned using disinfectants (according to a separate listing, e.g. Oxivir or Klorilli). Difficult stains – such as blood and urine – can be cleaned using an Isopropyl alcohol and water solution (1:10 ratio). After disinfection the surface must be cleaned with a clean, damp microfibre cloth.
Daily cleaning and maintenance
- Clean the entire surface using a mixture of 1:1 (neutral pH) and water. Do not use soap or cleaning solutions that contain alcohol, ketones, xylene, acetates or solvents (mineral/ white spirits).
- Completely remove excess cleaner with a white, clean, damp cloth.
- Dry the surface.
Make-up
- Use a straight application of neutral pH soap. Wipe with a clean white cloth or soft brush, rinse with clean water and dry.
Blood, urine, feces
- Use a 1:10 mix of Isopropyl alcohol and water. Rinse with clean water and dry.
Do not use!
- Lacquers, strong cleaners, detergents, xylene-based solutions, acetone or ketone (MEK). Cause immediate damage and contribute to the deterioration of the material
- Steam cleaning (temperature)
Attention!
Certain clothing and accessory dyes (such as those used on denim jeans) may migrate to lighter colours. This phenomenon is increased by humidity and temperature and is irreversible.
Suitable disinfectants
Download the recommended disinfectants listing (pdf-file).
Nature
Durable, high quality Nature represents a new generation of environmentally friendly materials. The material is in accordance with the Oeko-Tex standard and therefore does not include any heavy metals or phthalates. Thanks to its biocompatibility (EN ISO 10993-5 + 10) the material is safe for the skin. The new Nature feels very comfortable and warmer on the skin than regular artificial leather. It is especially suitable for medical and physiotherapy products.
Material composition:
Material composition:
- Approx. 50% Renewable raw materials
- Approx. 30% Natural based raw materials
- Approx. 20% Raw material based on crude oil
Technical features
Resistant to disinfectants (according to a separate listing)
Biocombatible
Flame retardant:
Resistant to abrasion
Tear-resistant
Long-lasting
Lightfast
Easy to clean
Environmentally friendly
Complies with Öko-Tex 100 standard
Fulfills REACH requirements
Conforms to toy safety standard EN 71-3
Biocombatible
Flame retardant:
- EN 1021-1+2
- BS5852 IS 0+1
Resistant to abrasion
Tear-resistant
Long-lasting
Lightfast
Easy to clean
Environmentally friendly
Complies with Öko-Tex 100 standard
Fulfills REACH requirements
Conforms to toy safety standard EN 71-3
Cleaning
The material should be cleaned regularly using a mild soap-based cleanser and microfiber or cotton cloth. If necessary, a soft brush can also be used. Visible dirt should be removed immediately. The cleaning procedure may need to be repeated. Then, wipe off the rest of the cleaning agent with a damp cloth and lukewarm water.
Do not use!
Attention!
Colorings caused by jeans or other textiles are excluded from any manufacturer´s guarantee.
Do not use!
- Solvents, chlorides, abrasives, chemical cleansers or polishing wax must not be used.
- Chemical cleaning
Attention!
Colorings caused by jeans or other textiles are excluded from any manufacturer´s guarantee.
Suitable disinfectants
Download the recommended disinfectants listing (pdf-file).
FRAGE ZUM PRODUKT
