Acute and
Delivery Unit
Hospital
Nursing
Homecare
Outpatients
Physio-
Surgery and
Veterinary
Easy Rider PRO Saddle Chair CH1300
With 2-part adjustable seat
Easy Rider PRO Saddle Chair CH1300
A saddle chair with 2-part adjustable seat. Width of the seat can be adjusted from 42 cm to 48,5 cm. The seamless upholstery is of the new stylish and extremely durable Future material (14 colors), environmentally friendly Nature (5 colors) or optional black leather. The chair features a seat angle adjustment and a gas spring assisted height adjustment with cover for the gas spring according to the base color.
Seat length is 42 cm. Safe Working Load (SWL) 150kg.
Standard configuration:
- polished aluminum Ø 528 mm base
- height adjustment range Medium (54 – 74 cm)
- black 65 mm castors
- upholstery Future (14 colors) or Nature (5 colors)
Product featured with Future Lagoon, polished aluminum Ø 528 mm base, black 65 mm castors and optional foot support ring
| Width | 42 - 48,5 cm |
| Length | 42 cm |
| Height adjustment | 54 - 74 cm |
| Castor | Ø65 mm, black |
| Base | Polished aluminum Ø528 mm |
| Upholstery | Future (14 colors) or Nature (5 colors) |
| Country of manufacture | Finland |
Factory-installed options:
- Upholstery: black leather
- Height adjustment Low (46 - 60 cm)
- Height adjustment High (65 - 91 cm)
- Base polished aluminum Ø610 mm
- Base white-coated Ø528 or Ø610 mm
- Back support with angle adjustment (requires base Ø610 mm)
- Foot height adjustment (requires 65 mm castors; not compatible with height adjustment Low)
- Foot support ring (not compatible with foot height adjustment; not compatible with height adjustment Low)
- Swinging saddle or pilates feature (not compatible with back support; adds 2 cm for min and max height): Mechanism that is flexible in every direction. Seat adjusts to user’s movements, increasing the reach and reducing the strain on the sternum. This feature activates the person sitting and reduces back fatigue, eliminating the need for additional angle adjustment.
- Castors:
- 65mm, white
- 65mm locking, black or white
- 50mm brake-loaded, black (locks when seated)
- 50 mm ESD, black (electrically conductive). Upholstery only of black ESD artificial leather.
- 65 mm ESD, black (electrically conductive). Upholstery only of black ESD artificial leather.
Future
Featuring a slightly pearlescent finish, the stylish Future is an environmentally friendly and fire safety tested upholstery material in the Lojer upholstery range. Its antibacterial, antimicrobial and mold-proofing properties make Future an ideal material for demanding applications. The material features cutting-edge coating technology that remains on the surface and does not wear out even when cleaned. At the same time it prevents the growth of bacteria (which causes smells and stains), prolonging the service life of the upholstered parts.
This extremely durable material is 3 to 6 times more durable than traditional faux leather materials (Martindale over 300 000 cycles) and highly resistant to deterioration such as cracking, splitting, and loss of flexibility. It is also waterproof and fade-resistant.
The surface coating, durability and performance of Future upholstery material have been designed specifically for the healthcare industry, where bacteria, abrasions and stains are particularly challenging. The material is easy to clean and must be cleaned frequently. It fulfills REACH chemicals regulation requirements, which proves a high emphasis level of health and environment protection.
Material composition:
This extremely durable material is 3 to 6 times more durable than traditional faux leather materials (Martindale over 300 000 cycles) and highly resistant to deterioration such as cracking, splitting, and loss of flexibility. It is also waterproof and fade-resistant.
The surface coating, durability and performance of Future upholstery material have been designed specifically for the healthcare industry, where bacteria, abrasions and stains are particularly challenging. The material is easy to clean and must be cleaned frequently. It fulfills REACH chemicals regulation requirements, which proves a high emphasis level of health and environment protection.
Material composition:
- Topcoat 81% vinyl
- Backing 19% polyester
Resistant to oil and fat
Antibacterial
Resistant to disinfectants (according to a separate listing)
Waterproof
Resistant to secretions
Flame retardant:
Lightfast
Antimicrobial
Tear-resistant
Long-lasting
Easy to clean
Environmentally friendly
Fulfills REACH requirements
Fulfills toys norm DIN EN 71-3
Antibacterial
Resistant to disinfectants (according to a separate listing)
Waterproof
Resistant to secretions
Flame retardant:
- EN 1021-1+2
- UNE 23.727-90
- NF P 92-503
- DIN 4102 B2
- ÖNORM B 3825
- ÖNORM A 3800
- UNI 9175
- IMO FTP Part 8
- FMVSS 302
- FAR 25.853
- ECE R118.02
- EN 71-2 Part 2
Lightfast
Antimicrobial
Tear-resistant
Long-lasting
Easy to clean
Environmentally friendly
Fulfills REACH requirements
Fulfills toys norm DIN EN 71-3
New coating technology continues to provide its bacteria-fighting protection even after repetitive cleanings. Advanced vinyl protection results in a more hygienic environment because germ counts can be kept down. It offers unsurpassed antifungal protection by resisting gram positive and gram -negative bacteria, filamentous fungi and yeast.
Possible stains, leaks or dirt must be cleaned immediately using a mild detergent solution (1:1 neutral liquid detergent and water) or a cleaning agent suitable for vinyl surfaces, a microfibre cloth and/or a soft brush. The material is then rinsed with clean water and the surface is dried. Future upholstery material can be cleaned using disinfectants (according to a separate listing, e.g. Oxivir or Klorilli). Difficult stains – such as blood and urine – can be cleaned using an Isopropyl alcohol and water solution (1:10 ratio). After disinfection the surface must be cleaned with a clean, damp microfibre cloth.
Daily cleaning and maintenance
Make-up
Blood, urine, feces
Do not use!
Attention!
Certain clothing and accessory dyes (such as those used on denim jeans) may migrate to lighter colours. This phenomenon is increased by humidity and temperature and is irreversible.
Possible stains, leaks or dirt must be cleaned immediately using a mild detergent solution (1:1 neutral liquid detergent and water) or a cleaning agent suitable for vinyl surfaces, a microfibre cloth and/or a soft brush. The material is then rinsed with clean water and the surface is dried. Future upholstery material can be cleaned using disinfectants (according to a separate listing, e.g. Oxivir or Klorilli). Difficult stains – such as blood and urine – can be cleaned using an Isopropyl alcohol and water solution (1:10 ratio). After disinfection the surface must be cleaned with a clean, damp microfibre cloth.
Daily cleaning and maintenance
- Clean the entire surface using a mixture of 1:1 (neutral pH) and water. Do not use soap or cleaning solutions that contain alcohol, ketones, xylene, acetates or solvents (mineral/ white spirits).
- Completely remove excess cleaner with a white, clean, damp cloth.
- Dry the surface.
Make-up
- Use a straight application of neutral pH soap. Wipe with a clean white cloth or soft brush, rinse with clean water and dry.
Blood, urine, feces
- Use a 1:10 mix of Isopropyl alcohol and water. Rinse with clean water and dry.
Do not use!
- Lacquers, strong cleaners, detergents, xylene-based solutions, acetone or ketone (MEK). Cause immediate damage and contribute to the deterioration of the material
- Steam cleaning (temperature)
Attention!
Certain clothing and accessory dyes (such as those used on denim jeans) may migrate to lighter colours. This phenomenon is increased by humidity and temperature and is irreversible.
Download the recommended disinfectants listing (pdf-file).
Nature
Durable, high quality Nature represents a new generation of environmentally friendly materials. The material is in accordance with the Oeko-Tex standard and therefore does not include any heavy metals or phthalates. Thanks to its biocompatibility (EN ISO 10993-5 + 10) the material is safe for the skin. The new Nature feels very comfortable and warmer on the skin than regular artificial leather. It is especially suitable for medical and physiotherapy products.
Material composition:
Material composition:
- Approx. 50% Renewable raw materials
- Approx. 30% Natural based raw materials
- Approx. 20% Raw material based on crude oil
Desinfiointiaineita kestävä (erillisen listauksen mukaisilla aineilla)
Bioyhteensopiva
Kestää verta ja eritteitä
Palosuojattu
Haalistumaton
Repeämätön
Pitkäikäinen
Helppo puhdistaa
Standardin Öko-Tex 100 mukainen
Ympäristöystävällinen
Täyttää REACH-vaatimukset
Täyttää lelujen turvallisuus standardin EN 71-3
Bioyhteensopiva
Kestää verta ja eritteitä
Palosuojattu
- EN 1021-1+2
- BS5852 IS 0+1
Haalistumaton
Repeämätön
Pitkäikäinen
Helppo puhdistaa
Standardin Öko-Tex 100 mukainen
Ympäristöystävällinen
Täyttää REACH-vaatimukset
Täyttää lelujen turvallisuus standardin EN 71-3
The material should be cleaned regularly using a mild soap-based cleanser and microfiber or cotton cloth. If necessary, a soft brush can also be used. Visible dirt should be removed immediately. The cleaning procedure may need to be repeated. Then, wipe off the rest of the cleaning agent with a damp cloth and lukewarm water.
Do not use!
Attention!
Colorings caused by jeans or other textiles are excluded from any manufacturer´s guarantee.
Do not use!
- Solvents, chlorides, abrasives, chemical cleansers or polishing wax must not be used.
- Chemical cleaning
Attention!
Colorings caused by jeans or other textiles are excluded from any manufacturer´s guarantee.
Download the suitable disinfectants listing (pdf-file).
