HighCare antidecubitus mattress

Image

HighCare antidecubitus mattress

High quality static antidecubitus mattress designed for the prevention of pressure ulcers in patients at low to medium risk 

Features:

Mattress:
  • Upper layer thickness 5 cm, density 50 kg/m3, viscoelastic foam
  • Base layer  thickness 8 cm, density 50 kg/m3, flexible foam
  • Fire retardant
  • Weight recommendation less than 200 kg

Hygiene cover:

  • Polyurethane coated polyester hygiene fabric
  • Non-permeable to liquids
  • Breathable
  • Antimicrobial
  • Oeko-Tex certified
  • Fire retardant
  • Flexible in two directions
  • Drop flap for zipper protection
Image

HighCare is a high quality static antidecubitus mattress designed for use as a sleeping surface for the prevention of pressure ulcers in patients at low to medium risk of pressure ulcers in f.ex. hospitals, nursing homes and home care. The mattress should be used as part of a pressure ulcer prevention programme. The weight recommendation is less than 200 kg.

The 5 cm thick upper layer of the mattress is a fire-retardant, softly mouldable visco-elastic foam (density 50 kg/m³) that equalises tissue pressure to prevent the development of pressure ulcers. The 8 cm thick base layer is a fire-retardant and durable rigid foam, HR foam (density 55 kg/m³), which supports the patient and eases postural support and patient movement. The two foam layers are glued together and have a total thickness of 13 cm.

The mattress hygiene cover is a polyester hygiene fabric coated with polyurethane, which is impermeable to liquids but still breathable. The material is Oeko-Tex certified, bi-elastic, antimicrobial *) and fire retardant. The zipper is protected by a drip flap to prevent moisture from entering the inside of the hygiene cover. The cover can be machine washed at 70-95°C when turned inside out. 

HighCare Rescue: The HighCare antidecubitus mattress is also available with a rescue cover. The fixed rescue cover is designed for rapid evacuation of the patient for example in case of fire. Rescue cover's upper side is made of the same material as the hygiene cover and the base material is a non-slip, water-repellent Oeko-Tex certified polyurethane coated polyamide. The rescue cover has integrated pull handles at both ends. The long sides have their own Velcro straps for patient restraint. All straps are in their own pockets and therefore do not interfere with bedding. The rescue cover can be machine washed on a delicate cycle at 70°C. 

The HighCare mattress is a Class I medical device in accordance with the Medical Device Regulation 2017/745 (MDR) and is CE marked. The mattress is manufactured in Finland by Vevia Finland Oy.

*) tested according to ISO 22196, the active biocide is dimethyloctadecyl(3-trimethoxysilylpropyl)ammonium chloride EU 528/2012

The mattress is available in sizes:

  • 75x200x13 cm
  • 80x200x13 cm
  • 85x200x13 cm
  • 78x205x13 cm
  • 88x205x13 cm
  • 78x215x13 cm
  • 88x215x13 cm
  • 118x205x13 cm
Image
TECHNICAL DATA
Thickness Base layer 8 cm
Upper layer 5 cm
Density  Base layer 50 kg/m3
Upper layer 50 kg/m3
Recommended patient weight Under 200 kg
CE-marked Yes
Country of Manufacture Finland

Products from this category

Image

  DELIVERY

We deliver our products quickly and as agreed, all over the world.

Read more about delivery »

  FINANCE

In addition to buying, we also offer other purchase methods such as leasing.

Read more about financing »

  SERVICE & SPARE PARTS

Maintenance and spare parts - also for other manufacturers' products.

Read more about service and spare parts »

Privacy Policy | Accessibility
Copyright © 2024 Lojer Oy. All Rights Reserved.